Installation steps and precautions of supermarket anti-theft device

Supermarket anti-theft device installation steps:
1. Provide a special power socket at the management desk and connect the ground wire.
2. There are two treatment schemes for arranging the connection lines between supermarket anti-theft devices:
a. Embedded pipeline: embedded 25PVC pipe is adopted. (Dual-core shielded wire for detection door and power supply)
b. Cutting the ground: After the ground cutting is put into the shielding line, ensure that the surface and the metal U-shaped groove are in a horizontal plane, and ensure that there is no leakage and collapse.
3. Arc metal trunking: ensure that the trunking is pasted in front of the ground and cleaned before it can be fixed, and the direction of the trunking is I-shaped with the two anti-theft antennas.
Note: At the equipment and host or power connection line, the straight type ensures that the trunking is straight, and the bend should be connected according to 45 degrees.

Training for staff:
1. Correct pasting and precautions for supermarket anti-theft labels
2. Correct installation and precautions for supermarket anti-theft hard label
3. Normal use of supermarket anti-theft auxiliary equipment (such as: correct use of demagnetizer, common problems, etc.)
4. Precautions for normal use and daily maintenance of equipment
5. Common equipment faults and simple troubleshooting
6. The correct handling form after the equipment alarm

Precautions for supermarket security door installation:
1. In order to ensure the quality of the project, first survey the interference source of the supermarket anti-theft device installation site, and accurately identify the installation site of the supermarket anti-theft door, and be sure to eliminate the fault at the first time.
2. The supermarket burglar alarm detector shall not be installed within 0.5 meters from the metal door or within 1 meter distance of any metal object, so as not to cause false alarms in the supermarket anti-theft system.

3. Strictly grounded, some three-core sockets do not have a grounding end, and the distribution cabinet needs to pull a special line again. On the one hand, this meets safety standards and avoids accidents; On the other hand, it also reduces the crosstalk of power grid clutter and ensures the normal operation of supermarket anti-theft equipment, in order to play a real sense of supermarket anti-theft effect.