eas security alarm system Manufacturers

I believe that many businesses will be forced by the manufacturer's engineer to use an independent power supply for the power supply of the anti-theft device during installation. Many people do not know the reason. Today, I will tell you about the power supply of the anti-theft device in the supermarket. Why do you need an independent power supply, let's take a look together.

Narrow AM Label and regular AM Label are two different types of electronic labels used in anti-theft systems. The differences between them mainly lie in size and performance. size: Narrow AM Label: Narrow AM labels are relatively small, long and narrow, and are suitable for use on small goods. Its smaller size can be better hidden on the product and reduce the impact on the appearance of the product. Conventional AM Label: Conventional AM labels are relatively large and generally wide in size, suitable for medium to large items. Its larger size takes up more visible space on the product.

Adding anti-theft soft labels in supermarkets is an important measure to protect the safety of goods. You can usually follow the following steps: Choose the appropriate label type: Choose the appropriate anti-theft soft label based on the characteristics of the product and packaging form. Some products may need to be affixed to the outer packaging, and some may need to be directly attached to the product itself.

EAS magnetic locking box is a commonly used anti-theft device in the commercial retail industry. It mainly protects goods from theft through electronic monitoring systems.

Anti theft label recycling regulations

For the correct removal of AM soft labels, the general soft labels decoding tool is a decoder (degausser), and the operation requirements are as follows: 1. First determine the position of the induction labels on the product. If it is a concealed tag, the reference mark shall be determined. Then swipe the side with the label or reference mark as close to the surface of the decoding board as possible to ensure that the label can pass through the effective decoding area. (The decoding area of most non-contact decoders is within 10cm from the surface of the decoder)