shopping mall alarm gates Manufacturers

EAS Triangle Tag is an electronic anti-theft tag that is often used to prevent theft of store goods. If it malfunctions, it will affect its normal function. Here are some common troubleshooting methods: Confirm tag activation: Some EAS tags need to be activated at the time of purchase, otherwise they will not trigger alerts. Make sure the tag is activated correctly.

​Self-alarm tags are a common anti-theft device for goods. Their function is to trigger an alarm when goods are taken out of the store without payment. This can help stores reduce theft and improve the safety of goods. Self-alarm tags are usually used in conjunction with access control systems.

The anti-theft device EAS system at the entrance of the supermarket has changed the way people stare at people to see goods in the past. Because the radio frequency anti-theft device is easily affected by the surrounding electric field environment, it often fails. To debug this type of model, first check whether the transmitting antenna is normal. Hard tag then is made of steel pin, plastic casing, lock core, and lock core is a more important part, and it is the simple and easy device that is formed by three beads 11 a steel ring and a spring. In the process of installing the supermarket anti-theft device, it must not be operated with electricity. But many of us have also tried to open it by pulling out the steel needle by hand. It may be the main board, sensitivity, power supply and other problems of the device.

The packaging design of milk powder safes is directly related to the safety, hygiene and quality of milk powder. The following are some basic requirements for milk powder safes in packaging: 1. Moisture and humidity resistance Strong sealing: The packaging should have good sealing performance to prevent moisture in the air from entering the box.

For the correct removal of AM soft labels, the general soft labels decoding tool is a decoder (degausser), and the operation requirements are as follows: 1. First determine the position of the induction labels on the product. If it is a concealed tag, the reference mark shall be determined. Then swipe the side with the label or reference mark as close to the surface of the decoding board as possible to ensure that the label can pass through the effective decoding area. (The decoding area of most non-contact decoders is within 10cm from the surface of the decoder)